Acura Integra Transmission Shift Linkage Roll Pin Removal Tool, bitch pin

Description

That little black pin on the left, is the roll pin that connects the shift linkage to the control shaft on the transmission. It is called the "bitch pin", and if you have ever had to remove one, you understand how it got its name.
There are a number of ways to remove these pins, but I have found this tool works the best. A few sharp blows of a hammer, from the underside of the car, to either remove or install the pin. This tool can save hours of sweating and cursing, just to ruin a dealer only part. I have had this tool in my toolbox for years. Recently, a friend asked me to make one for him. Once you get the lathe fired up, it is just as easy to make a dozen as it is to make one. So here is your chance to own one too. This tool will work with:
-1984-2000 Civic
-1984-1991 CRX,
-1986-2001 Integra
-1993-1997 Del Sol
It may work with other years and models, but please contact me to confirm before placing your order.
The roll pin in the photo is for demonstration purposes only and is not included in the auction.
***To prevent injury, safety glasses need to be worn. Always be sure the vehicle is properly supported, before getting under the vehicle. Do not attempt any any repair if you have any doubt on how to do it safely.