4 in 1 Ball Joint Press & U Joint Removal Tool Kit with 4x4 Adapters Heavy Duty

Description

Product Description
The 8milelake Ball Joint Service Tool Kit with 4-wheel Drive Adapters provides everything you need to service ball joint on most 2WD and 4WD vehicles.
Allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles)
Designed for the easy removal of press fit parts including ball joints, brake anchor pins, and more.
4-IN-1, 4 wheel drive ball joint remover/installer kit.
Heavy duty forged C clamp set is excellent for removal/installation of press-fit parts such as ball joints, universal joint and truck brake anchor pins.
Will remove rusted and corroded parts.
Time and money saving tool.
Specification:
A-- Installing Cup 3.676inches L x 1-3/4inches I.D. x 2inches O.D.
B
-- Receiving Cup 2-1/2inches L x 2inches I.D. x 2-1/4inches O.D.
C
-- Install Cup Adapter 0.845inches L x 1.879inches I.D. x 2-1/4inches O.D.
D
-- Removal Adapter 1.148inches L x 1/2inches I.D. x 3inches O.D.
E
-- Installation Adapter 1.122inches L x 0.941inches I.D. x 3inches O.D.
F
-- Receiving Tube 2-1/4inches L x 2.723inches I.D. x 3inches O.D.
G
-- Receiving Tube 1-3/4inches L x 2-1/4inches I.D. x 2-1/2inches O.D.
H
-- Receiving Tube 1-3/4inches L x 1-3/4inches I.D. x 2inches O.D.
I
-- Screw 1.08inches
J
-- Ball Joint Press 8.75inches inner 6inches
Blow molded case for easy storage and transport
Brake anchor pin reoval and installation
1. Remove all lock ring retainers from the brake anchor pins.
2. Position the C-frame press over the brake spider.
3. Tighten the forcing screw until the anchor pin is removed.
U-joint assembly and disassembly
The basic C-frame press is used to service the U-joints on most cars and light trucks. U-joints can be serviced either on or off the vehicle.
Blow moded case
The durable storage case is included for easy storage.